Fireproof Fibre Cement Board Prefabricated House Wall Board
|FOB Price:||US $3-9 / Square Meter|
|Min. Order:||1,000 Square Meters|
|Min. Order||FOB Price|
|1,000 Square Meters||US $3-9/ Square Meter|
|Payment Terms:||L/C, T/T|
- Fiber cement board
- 19 Products
- Product Image
- Product Name
- FOB Price
- Payment Terms
- Product Package
- Product Attribute
- Product Table
- Model NO.: FC244010
- Strength Grade(Mpa): 32.5R
- Hardening Feature: Rapid Hardening
- Heat of Hydration: Moderate Heat
- Technique: Dry Process
- Place of Origin: Guangdong, China (Mainland)
- Edges: Square / Beveled / Taper
- Thickness: 4.5mm-30mm
- Fire-Proof Rate: Class-a Incombustible
- Swelling Ratio: Less Than 0.4%
- Transport Package: Wooden Pallets, 8 Wooden Pallets in 1X20gp
- Origin: Guangdong Province
- Type: Composite Portland Cement
- Mineral Composition: Portland Cement
- Function: Special Cement
- Fineness: 3~30um
- Color: Grey
- Raw Materials: Calcium Sillicate, Fiber, Cement
- Application: Partition, Ceiling and Floor
- Desity: 1.2-1.5g/cm3
- Water Content Ratio: Less Than 30%
- Trademark: HIGHKA
- Specification: SGS, ISO
- HS Code: 68118200
Fibre Cement Board Prefabricated House Wall Board
Fibre cement board is a composite material made of quartz sand, cement and cellulose fibers. This product adopts imported pure paper pule from Canada, not included waste paper pulp.
Fiber cement board is manufactured in a sheet form and they are used for interior and exterior suspension, partition and flooring application.The normal size is 1220×2440mm,thickness from 4.5~20mm, and density is 1.3~1.6g/cm3. There are low-density, middle-density and high-density.
1. 100% Asbestos Free
2. Fire Resistance and Moisture Resistance
3. High Strength and Good Stability
4. Inorganic Material, Anti Fungus and Antiseptic
5. Widely used in Partition and Suspension System.
Name: Fibre Cement Board
|Normal Size||1220mm × 244mm or 1200mm × 2400mm|
|Thickness||6mm ~ 25mm|
|Color||Light Grey / Dark Grey / White / Black / Yellow / Green / Red|
|Density||1.2 ~ 1.5kg/cm3|
|Fire Resistance||Incombustibility A Class(GB8624-A)|
|Bending Strength||Transverse≥11.0N/mm3, Vertical≥8.5N/mm3|
|Radioactivity||Conforming to GB6566-2001 A Class|
|Asbestos||100% Asbestos Free|
|Freeze Resistance||No distortion after 25 repeated cycles of freezing and thawing|
Partition Installing Method
1. Galvanized Metal Frame
a.The top and bottom keels are fixed respectively top floor and on floor with expansion bolts.
b.The vertical keel should be aligned well according to the requirement (generally being 612 mm) with
laterally supporting keel installed.
2. Board Material Package Fixed
a.Cutting the board material to the dimensions needed (about 10mm lower than wall height)
b.Board material is fixed on keel in anchoring seam way with tapping screw: the interval of tapping screw is generally
about 200~250mm with screws sinking 0.5mm under the board face.
c.The expansion seam of about 4mm between boards should be kept.
d.The shrouding should be fixed from the middle to the four sides and cannot be operated at multipoint simultaneously
to avoid generating inner stress to make board material bucking.
e.Before board being packaged and fixed, depending the needs, glass cotton or rock cotton can be filled.
Ceiling Installing Method
1.Carry out ceiling line-measuring to determine the ceiling's fixed position, the boom's central range is generally 1200.
2.Connect and fix the boom and main keel with hanging piece to make the main keel keep level position.
3.Vertically fix the sub-keel to the main keel with hanging piece; the sub-keel axis'central range is 612mm.
4.Install the laterally supporting keel properly, its central ranges is 1224mm.
5.Fix the board on sub-keels with tapping screws, and to well the seam-connecting treatment.
The hanging system of board combined with light steel keel is divided into two kinds of person-standing type
and non person-standing type; for the non person-standing type,only consider the self-weight of ceiling and light.Lamp
without loading other loads; for the person-standing type. Consider about 80~100kg load when someone repaired it.
1.Standard exporting packing, good pallet+pearl wool+corner protective paper+packing belt+plastic thin film
2.Payment:Payment:30%T/T deposit, 70%T/T against BL copy; Irrevocable L/C at sight;
3.Shipment: 15 days after payment.
4.Terms of trade:EXW,FOB,CIF.
5.Quantity can be customized.
|Loading Quantity Per 20GP|
How to contact with us?
Please email to us by made-in-china
Contact person:Mr. jacky chen